Product Certification
UL Listed / FM Approved / VdS Approved (EX 29405)
Design Standard
BS EN 593
Connection Ends
Groove to ISO 6182
Top Flange Standard
ISO 5211
Stem drive by keys, parallel or diagonal square or flat head
Working Pressure
PN16
Temperature Range
0°C – 100°C
Coating
Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon request
| Part No. | Part | Standard Specification |
|---|---|---|
| 1 | Body | EN-GJS-450-10 |
| 2 | O-Ring | NBR |
| 3 | Stub Shaft | SS431 |
| 4 | Disc | EN-GJS-450-10+EPDM |
| 5 | Drive Shaft | SS431 |
| 6 | Hex Nut | Carbon Steel Zinc plated |
| 7 | Signal Gearbox | Body:EN-GJS-450-10 |
| 8 | O-Ring | NBR |
| Inch | mm | A+B+L | C | F | G | H | W |
|---|---|---|---|---|---|---|---|
| 2″ | 50 | 276.5 | 81 | 60.3 | 57.15 | 202.2 | 125 |
| 2.5″ | 65 | 295.5 | 97 | 76.1 | 72.26 | 202.2 | 125 |
| 3″ | 80 | 312.5 | 97 | 88.9 | 84.94 | 202.2 | 125 |
| 4″ | 100 | 345.5 | 116 | 114.3 | 110.08 | 202.2 | 125 |
| 5″ | 125 | 374.5 | 148 | 139.7 | 135.48 | 202.2 | 125 |
| 6″ | 150 | 408.5 | 148 | 165.1 | 160.9 | 215 | 225 |
| 8″ | 200 | 470.5 | 133 | 219.1 | 214.4 | 274 | 225 |
| 10″ | 250 | 534.5 | 159 | 273.1 | 268.28 | 274 | 225 |
| 12″ | 300 | 612 | 165 | 323.9 | 318.29 | 293.5 | 225 |
Notes
1. Product images are for illustration purposes only. Actual product may vary.
2. Actual dimensions may change over time, due to continual design improvements. Please confirm before placing order.
V4
V8
DH77X
H44X2
DH87X
H84X
XD371XL
XD371X
D81X4, D381X4
XD381X
Z45XC-2
Z45XC
Z85X
XZ41X
XZ81X
